Low Voltage Landscape Lighting Wire
Choose low-voltage landscape lighting wire for the fixture load, cable route and required length. Compare direct-burial cable options by gauge, conductor count and spool size. Plan wire and transformer selection together so voltage at each fixture stays within its manufacturer’s specified operating range.
Not sure which gauge you need? Check every wire run with our landscape lighting voltage drop calculator.
What does 12/2 landscape wire mean?
The first number identifies American Wire Gauge and the second identifies conductor count. For example, 12/2 describes two 12 AWG conductors. A lower AWG number indicates a larger conductor. Check the actual cable listing and application rating rather than assuming every two-conductor wire is suitable for burial.
Choose gauge by load and distance
Longer routes and higher loads increase the importance of voltage-drop planning. There is no single distance limit that makes one gauge correct for every system. Account for the circuit layout, fixture requirements and the load on each run, then verify operating voltage under load.
Use our wire gauge and voltage-drop guide for sizing and 12/2 versus 10/2 wire guide for selection examples. Confirm spool length against the routed distance and service allowance.
Complete the connections
Match wire connectors to the conductor sizes, conductor count and installation environment. Pair the circuit design with an appropriate landscape lighting transformer. Eligible orders of $130 or more receive free shipping; see the store shipping policy for details.
Should I use 12/2 or 10/2 landscape lighting wire?
Choose using the actual cable route, connected load and acceptable voltage at the fixtures. A larger conductor can reduce voltage drop, but no single run-length rule fits every system. Check the linked sizing guide before selecting the spool.