Landscape Uplights & Spotlights
Landscape uplights and spotlights are one family of aimable fixtures: uplighting is where the light is aimed, a spotlight is the focused beam, and accent lighting is the effect on your trees, walls and columns. Shop low voltage LED and solid brass models from Kichler, WAC, Unique, Vista, Dauer and Sollos.
Shop by brand: Dauer accent lights · Kichler landscape spotlights and flood lights.
Shop WAC, Sollos, Vista, Unique and CAST spotlights and flood lights. Read our uplighting placement guide or large-tree lighting guide.
Part of our landscape lighting collection: shop every fixture type, transformer and kit in one place.
How to choose landscape uplights and spotlights
Compare spotlight beam coverage
Concentrates coverage on a smaller target at the same distance.
Spreads coverage across a broader target at the same distance.
Uplight, spotlight or accent light?
All three describe the same fixtures from a different angle. Uplighting is the technique: the fixture sits at ground level and aims up into a tree, column or wall. Spotlight describes the beam: a narrow, focused beam for a trunk, statue or flag. Accent lighting is the result: one feature stands out from its surroundings. Most fixtures on this page can be used all three ways, and many can also be mounted on a post or tree and aimed down.
Spot or flood beam?
Beam angle decides how much of the feature you light. A narrow spot beam (roughly 10° to 25°) reaches higher and concentrates light on a slim trunk or column. A wider flood beam (roughly 35° to 60°) covers a spreading canopy, a shrub mass or a section of wall from closer in. Many lamp-based fixtures accept different lamps or lenses, so you can change the beam later. A wide accent beam is not the same as a dedicated flood or wall wash light, which is built to spread light evenly across a large surface.
Choose output, color, material and adjustability
Match lumen output to the size of the feature and how far away it sits: a small ornamental tree needs far less light than a mature oak. Keep color temperature consistent across the property (see 2700K vs. 3000K). Solid brass and copper weather to a natural patina and suit coastal and high-end installs; powder-coated aluminum costs less (see brass vs. aluminum). Check for an adjustable knuckle, a glare shield or cowl, and whether beam or brightness can be changed after installation.
Integrated LED or replaceable lamps?
Integrated designs may offer model-specific output, beam or color-temperature adjustment. Lamp-ready fixtures let you choose a compatible MR16 or PAR36 lamp. Check which adjustments are included and whether a lamp is supplied. Our integrated vs. replaceable-lamp guide compares the two.
Want the fixture hidden?
For an uplight that sits flush with the ground, use an in-ground well light. It keeps hardware out of sight in lawns, beds and paving, with less freedom to re-aim later. To light from above instead, see downlights for moonlighting.
Finish the mounting and power plan
Match the voltage, power supply and controls to the exact fixture. Choose ground stakes or mounting accessories suited to the location, and add glare shields and shrouds where the source stays visible. Plan wire and transformer capacity together.
How do I choose spotlights for trees?
Start with the tree and where people view it from. A slim trunk or palm usually needs one narrow spot beam; a broad canopy often looks better with two or three wider beams from different sides. Test positions after dark and keep light out of windows and normal sightlines. Read our uplighting placement guide and large-tree lighting guide.
Compare CAST bronze spotlights or Sollos bullet and PAR36 uplights, and complete the install with our mount-selection guide and glare-control guide.