10/2 Landscape Lighting Wire
Shop 10/2 landscape lighting wire for compatible low-voltage outdoor lighting systems. 10/2 means 10 AWG wire with two conductors. Compare Paige Electric 250 and 500 ft reels.
Paige Electric 10/2 wire in 250 and 500 ft reels
Compare LWIRE10 for 250 feet and LWIRE10/500 for 500 feet of two-conductor landscape cable. Choose the purchased length from your complete cable schedule, including branches and connection allowances. A large reel may supply several separate runs.
When should you compare 10/2 with 12/2?
For comparable copper conductors, 10 AWG has less resistance than 12 AWG. It can reduce voltage drop under the same load and distance, making it worth evaluating for longer routes or more demanding layouts. It does not increase transformer capacity or remove circuit-load limits.
Compare 12/2 landscape lighting wire using the same fixture load and route. Select the conductor from a voltage-drop calculation and the equipment instructions, not a universal distance rule.
Check connectors and transformer terminals
The larger conductor must fit the transformer terminal and every splice connector. Check the approved combination of wire sizes and conductor quantities, especially where a 10 AWG feed joins smaller fixture leads. Do not trim strands to force a cable into an undersized terminal.
How far can 10/2 landscape wire run?
The answer depends on the connected load, cable routing, supply voltage and the voltage required at each fixture. Reel length is the quantity purchased, not an approved circuit length. Use our wire-gauge and voltage-drop guide to plan the layout.
Browse all landscape lighting wire, compare landscape transformers, and choose compatible waterproof wire connectors.
