Brilliance Glacier Hanging Down Light

The Glacier Hanging Down Light works with MR16 lamps or MR16 Chameleon lamps. It features a frosted shade perfect for projecting soft RGBW light.

Fixture Finish Maintenance

The Glacier fixture is available in the following finishes with a frosted acrylic shade: machined copper, brass, or blackened brass. These metals offer a beautiful living finish that weathers over time to a unique patina. If you prefer to maintain the original finish, we recommend wiping down the fixture periodically with a light oil, such as WD-40. 

INSTALLATION

INSTALLING THE FIXTURE

1. Unscrew the fixture body from the base.

2. Remove the stainless-steel snap ring from the lamp holder. 

3. Install the lamp in the socket 

4. Lay the front of the lamp inside the brass lamp holder and install the snap ring on the back-side lip of the MR16 lamp 

5. Install the snap ring

6. Reinstall the lamp holder into the fixture body.

HANGING THE FIXTURE

IMPORTANT: DO NOT INSTALL ON OR NEAR ANY HIGH VOLTAGE POWER LINES

1. Hang the fixture from a secure stainless steel eye bolt, with or without a chain. 

2. Create a drip loop with the wire by bending the wire to a slope one inch below the fixture cap