$9.99 shipping on orders under $130
  1. Home
  2. Brilliance LED Lamps
  3. Brilliance Biscayne MR16 Top Well Light

Brilliance Biscayne MR16 Top Well Light

Product Description

BISCAYNE

The Biscayne Well Light comes in two top variations: flat glass or grate. Both the flat glass and grate tops come in a black finish. The Biscayne is fitted for any of our MR16 lamps and really comes to life with the Chameleon MR16 for RGBW applications.


BISCAYNE WELL LIGHT
Use Well Lighting & Underground Up Lighting
Lamp MR16, 4W, 2700K, 30°
Finish Blackened Brass

 

INSTALLATION

INSTALLING THE LAMP

  1. Loosen the allen screws on the lens cap and remove. 

  2. Install the lamp into the socket and adjust the gimbal the proper direction.

  3. Return the lens cap and tighten the screws to a snug hand tight.

INSTALLING THE FIXTURE

  1. Dig a hole in the ground approximately 8” wide by 10” deep.

  2. Connect the power cable to the fixture, leaving 2 feet of wire coiled in the bottom of the fixture for future service.

  3. Pour 8” of pea gravel in the hole.

  4. Place the fixture in the center of the hole.

  5. Add more pea gravel to fill the hole 1” before the fixture lip. This will allow for proper drainage around the fixture. 

  6. Apply glass wax on top of the lens to protect against standing water. 

Sku: BISCAYNE-WL-MR16-FLAT
Vendor: Brilliance LED
$207.97
Maximum quantity available reached.

Related products  

More Brilliance LED lighting

Explore Brilliance LED fixtures, lamps and accessories

For compatible low-voltage systems, compare lamps and power supplies. Check the fixture’s lamp type, input voltage and control requirements before adding components.