120V Line Voltage Landscape Lighting
120V line voltage landscape lighting runs directly on household or building power, with no low voltage transformer. It suits commercial properties, long runs from the panel, tall trees and building facades, and anywhere you want high-output flood or security lighting. Shop hardwired flood, spot, wall wash, bollard, path and well lights from WAC, Kichler and RAB, including some fixtures also rated for 277V commercial circuits.
120V vs. 12V landscape lighting: how to choose
When to choose line voltage
- Long distances: a 12V system loses voltage over long cable runs, so far-off fixtures can dim. At 120V, voltage drop is far smaller over the same distance.
- High output: line voltage floods and spots can light tall trees, flagpoles, signs and building walls that are hard to reach with 12V fixtures.
- Commercial sites: fixtures rated for 120–277V can run on the same circuits as a building's other exterior lighting.
- Existing wiring: if a 120V circuit already runs to the yard, a line voltage fixture can often connect without adding a transformer.
Choose low voltage landscape lighting instead for most residential gardens and paths. 12V systems are lower risk to install, use direct-burial cable, and are easy to add to over time.
Installing hardwired landscape lights
Line voltage fixtures are hardwired to a 120V or 277V circuit. Have a licensed electrician install them, using wet-location rated boxes, GFCI protection where required, and the cable type and burial depth your local electrical code calls for. Check each fixture's specification sheet for its input voltage, wattage and mounting.
Shop 120V landscape fixtures by type
- 120V outdoor flood lights for facades, trees, signs and security lighting.
- 120V path lights and bollard lights for walkways, driveways and parking areas.
- Spot, accent, wall wash and well lights, all in the grid below.
Looking for something else? See 120V outdoor wall lights for sconces and porch lights, or 120V LED bulbs for replacement lamps.
Frequently asked questions
Is line voltage the same as high voltage landscape lighting?
Yes. "Line voltage" and "high voltage" both describe landscape lighting that runs on standard 120V power, as opposed to 12V low voltage systems.
Can I mix 120V and 12V landscape lights?
Yes, on separate circuits. Line voltage fixtures connect to a 120V circuit; low voltage fixtures need a transformer. Never connect a 12V fixture directly to 120V power.
Do 120V landscape lights need a transformer?
No. They connect directly to line voltage. A transformer is only needed for 12V low voltage fixtures.